Answer six questions before you read on
1How much do you need to sell this month before you make a single dollar of profit?
If you don't know, every month is a guess. Break-even turns "was that a good month?" into a question you can answer on day 15.
2Your fixed costs are A$50,000 a month and your gross margin is 40%. Do you need A$50,000 of sales to break even?
No, A$125,000. Each dollar of sales contributes only 40 cents to fixed costs.
3Is your own pay a fixed cost?
It should be. If owner pay is left out, the business can look like it breaks even while failing to pay the person running it.
4You break even on paper. Will the bank balance hold steady?
Not if you're repaying loans. Loan principal isn't in profit but it leaves the bank. Depreciation is in profit but doesn't. Cash break-even adjusts for both.
5A new hire costs A$90,000 a year. How much extra do you need to sell to pay for them?
At a 40% margin, A$225,000 in extra sales a year, or the hire has to lift margin or capacity in some other way.
6Sales are 12% above break-even. Is that comfortable?
It's thin. One bad month or a lost customer could wipe it out. A margin of safety above about 25% gives real room.
Fixed costs, variable costs and contribution
| Type | Behaves | Examples |
|---|---|---|
| Variable (direct) costs | Rise and fall with sales | Materials, stock, subcontractors, merchant fees, freight, casual labour tied to volume |
| Fixed costs | Stay the same whatever you sell, within a range | Rent, salaried staff, owner pay, insurance, software, accounting, vehicle leases |
| Contribution | What each sale leaves after variable costs | Sales × gross margin % |
Some costs are partly both, such as a manager's salary plus overtime. Split them roughly; precision here matters less than consistency.
The usual advice, and what it leaves out
- "Break-even is when revenue equals costs." True, but it's more useful as a sales target.
- "Use the costs on your P&L." Often leaves out owner pay, and includes depreciation but not loan principal.
- "Calculate it once a year." Costs and margins change; it should be checked quarterly.
Calculate break-even, target sales and margin of safety
Cash break-even: what the bank balance needs
If your cash break-even is well above your profit break-even, loan repayments are running ahead of depreciation. Sales above profit break-even but below cash break-even mean a profitable business whose bank balance still falls. See profitable but no cash.
Using break-even for decisions
| Decision | Extra sales needed |
|---|---|
| A new hire | Their full yearly cost ÷ gross margin %, unless they also raise margin or capacity |
| A second location | Its fixed costs ÷ gross margin %, plus set-up costs recovered over a set period |
| A price rise | Break-even falls, because each sale contributes more |
| A price cut | Break-even rises, often sharply |
| A new loan | Cash break-even rises by repayments ÷ gross margin % |
Turn break-even into a daily target: monthly break-even ÷ trading days. On day 15, you'll know whether the month is on track.
Break-even in six businesses
Each case shows profit break-even, cash break-even and the decision it informed.
These are composite businesses with illustrative figures, built to show how the method works. They are not CFOSurge client results.
Sole trader electrician
Weekly break-even (illustrative example)
| Fixed costs: van, insurance, phone, software, owner pay before tax | A$3,000 a week |
| Gross margin after materials | 55% |
| Profit break-even | A$5,450 a week |
| Cash break-even: + van loan principal + tax set-aside | A$6,400 a week |
| Daily target (5 days) | A$1,280 |
| Usual sales | A$6,200 a week · just below cash break-even |
The diagnosis
Including owner pay and the van loan, the electrician was slightly below cash break-even, which explained why the tax account kept falling short.
The useful habit was converting the weekly figure into a daily one. By Wednesday lunchtime, the electrician knew whether the week needed an extra job or two, and could fill it with small maintenance work instead of discovering the gap on Friday.
The full solution, in order
- Raise the rate to lift margin.
- Use a daily target to fill gaps early in the week.
- Review the van loan term.
- Recheck each quarter.
- List fill-in work (small maintenance jobs, regular property-manager work) to call on when a week is tracking below break-even.
- Price the call-out fee so short jobs contribute properly to the weekly target.
- Recalculate after any rate or cost change, such as insurance or a new van loan.
Don't do this
- Leaving owner pay out of fixed costs.
- Ignoring the loan principal.
Numbers to watch every month
- Weekly sales against cash break-even
- Margin after materials
- Daily sales against the daily target
- Fill-in work booked
Residential builder
Monthly break-even (illustrative example)
| Fixed overheads: salaried staff, office, vehicles, owner pay | A$85,000 a month |
| Gross margin on contracts | 15% |
| Profit break-even | A$567,000 of work a month |
| Cash break-even with equipment loans | A$590,000 a month |
| Average work completed | A$600,000 a month |
| Margin of safety | about 5% · fragile |
The diagnosis
A thin margin multiplies break-even. At 15%, every dollar of overhead needs nearly seven dollars of work. Raising margin to 18% would cut break-even to A$472,000.
Thin margins also make break-even very sensitive. At 15%, losing two points of margin on fade raises break-even by more than A$75,000 a month, which is why job-level margin control matters as much as winning work.
The full solution, in order
- Lift quoted margin, especially on renovation work.
- Hold overheads flat until margin of safety exceeds 15%.
- Track work completed against break-even monthly.
- Show break-even in the monthly job report so every new contract is judged against it.
- Price overhead recovery explicitly in quotes, rather than hoping margin covers it.
- Test new fixed costs (a supervisor, an office move) by the extra work they need at your real margin.
Don't do this
- Adding supervisors on thin margins.
- Chasing volume at low margin.
- Taking on fixed costs because one quarter was busy.
Numbers to watch every month
- Work completed against break-even
- Margin fade
- Margin of safety each month
Online store
Monthly break-even (illustrative example)
| Fixed costs: warehouse, salaried staff, software, owner pay | A$38,000 a month |
| Gross margin after fees, shipping and acquisition cost | 30% |
| Profit break-even | A$127,000 a month |
| Actual sales | A$125,000 a month |
| Margin of safety | about −2% · just below break-even |
The diagnosis
Once acquisition cost was treated as a variable cost of each sale, it was clear the store was just below break-even and growing sales through paid ads wouldn't fix it.
Once acquisition cost was counted as part of each sale, the store could see that its newest paid channel was selling below break-even: each order through it added sales but lost money.
The full solution, in order
- Lift margin through shipping charges and pricing on own-brand products.
- Cut acquisition channels whose cost exceeds first-order gross profit.
- Grow repeat sales, which carry no acquisition cost.
- Set a maximum acquisition cost per order from margin and break-even.
- Lift average order value with bundles and a higher free-shipping threshold.
- Review warehouse and software costs against the volume they actually support.
Don't do this
- Buying growth below break-even.
- Treating marketing as fixed.
- Measuring marketing by revenue rather than contribution.
Numbers to watch every month
- Margin after acquisition cost
- Repeat purchase rate
- Contribution per order by channel
- Average order value
Consulting firm considering a hire
Break-even for a new hire (illustrative example)
| Full yearly cost of the hire | A$130,000 |
| Gross margin on the hire's billable work | 60% |
| Extra fees needed to break even | A$217,000 a year |
| At A$120 an hour billed | about 1,800 billable hours |
| Realistic billable hours in year one | about 1,200 |
| Year-one shortfall | about A$72,000 of fees |
The diagnosis
The hire couldn't pay for themselves in year one on billable work alone. It made sense only if it freed the directors for higher-rate advisory work or brought new clients.
The calculation changed the hiring plan rather than cancelling it. Hiring someone who would free the directors for higher-rate advisory work made the numbers work; hiring to absorb overflow at standard rates did not.
The full solution, in order
- Price the hire's ramp-up into the plan.
- Free director time for higher-rate work.
- Check pipeline cover before hiring.
- Define the hire's billable target and ramp-up month by month.
- Pre-sell work: aim to have a share of the hire's first-quarter hours committed before they start.
- Revisit after six months against the break-even hours.
Don't do this
- Hiring on hope.
- Ignoring ramp-up time.
- Measuring a new hire only on busyness.
Numbers to watch every month
- Utilisation of the new hire
- Director hours on advisory work
- Billable hours of the new hire against target
Café
Daily break-even (illustrative example)
| Fixed costs: rent, manager, loan, insurance, owner pay | A$32,000 a month |
| Gross margin after food, beverage and variable wages | 40% |
| Profit break-even | A$80,000 a month · about A$2,700 a trading day |
| Average Monday takings | A$1,900 |
| Average Saturday takings | A$4,100 |
| Decision | Shorter Monday hours and a lighter roster |
The diagnosis
Monthly break-even hid the pattern. By day, Mondays and Tuesdays lost money every week. Shorter hours and a smaller roster on those days lifted profit without losing customers.
Day-level break-even also showed that the Saturday surplus was paying for Monday's loss. Trimming hours on quiet days kept the regulars and stopped the subsidy.
The full solution, in order
- Calculate break-even by day.
- Adjust hours and rosters on days below it.
- Promote quiet days where margin allows.
- Track takings by hour to find the quietest trading windows, not just the quietest days.
- Build the roster from forecast takings against the daily break-even.
- Test a quiet-day offer only where its margin stays above break-even.
Don't do this
- Same hours and roster every day.
- Discounting quiet days below break-even.
Numbers to watch every month
- Takings by day against daily break-even
- Wages by day
- Takings by hour
- Wages by day as a share of takings
Food manufacturer adding a second shift
Break-even for a second shift (illustrative example)
| Extra fixed cost: supervisors, utilities, maintenance | A$45,000 a month |
| Gross margin on extra output | 30% |
| Extra sales needed | A$150,000 a month |
| Confirmed extra orders | A$95,000 a month |
| Decision | Overtime until orders reach the break-even |
The diagnosis
The second shift would have lost money until orders grew another A$55,000 a month. Overtime cost more per hour but less in total at the current volume.
The working capital for the extra output also had to be funded. At a 90-day cash cycle, A$150,000 a month of extra sales would tie up around A$450,000 before it paid back, which strengthened the case for waiting.
The full solution, in order
- Use overtime until confirmed orders cover the shift's break-even.
- Seek longer contracts to justify the fixed cost.
- Recheck monthly against the order book.
- Model the cash needed for the extra volume as well as the profit break-even.
- Ask the customer for a longer commitment or volume guarantee before adding a shift.
- Set the order-book threshold that triggers the second shift.
Don't do this
- Adding fixed capacity ahead of orders.
- Ignoring the cash cost of the shift's working capital.
Numbers to watch every month
- Order book against shift break-even
- Overtime cost
- Cash conversion cycle
- Overtime hours per week
Hover over a business for a preview (tap on a phone), then click to open the full case.
If you're below break-even
- Margin first. A small price rise lowers break-even straight away. See raising prices.
- Mix. Shift sales towards higher-margin work.
- Fixed costs. Look at the three or four largest lines.
- Debt terms, for cash break-even.
- Then volume, once each sale contributes enough.
Stage 9 · AvoidSix break-even mistakes
6 mistakes
- Leaving out owner pay.
- Using markup instead of margin.
- Ignoring loan principal in cash planning.
- Counting variable labour as fixed, or the reverse.
- Using GST-inclusive sales.
- Never updating it.
Stage 10 · DecideMargin of safety guide
Summary table
| Margin of safety | What it means |
|---|---|
| Below 0% | Losing money; act now |
| 0–10% | Fragile; one bad month causes a loss |
| 10–25% | Workable; build margin before adding fixed costs |
| Above 25% | Room to absorb shocks or invest |
Official sources and guidance
Rules, rates and thresholds change. Check the current position at these official sources before acting.
- business.gov.au: Create a budgetBudget templates and guidance.
- business.gov.au: Choose a pricing strategyCommon pricing approaches for small business.
- ATO: Small business benchmarksIndustry cost and income ratios from tax data.
ReferenceKey terms in plain English
7 terms
- Break-even point
- The sales at which gross profit exactly covers fixed costs.
- Fixed costs
- Costs that don't change with sales in the short term.
- Variable costs
- Costs that rise and fall with sales.
- Contribution margin
- Sales less variable costs, often expressed as a percentage of sales.
- Margin of safety
- (Actual sales − break-even sales) ÷ actual sales.
- Cash break-even
- Sales needed to cover fixed cash costs, loan principal and tax set-aside, excluding depreciation.
- Target profit sales
- (Fixed costs + target profit) ÷ gross margin %.
Questions owners also ask
How do I calculate my break-even point?
Divide your fixed costs, including owner pay, by your gross margin percentage. If fixed costs are A$50,000 a month and gross margin is 40%, break-even is A$125,000 of sales a month.
What is the break-even formula?
Break-even sales = fixed costs ÷ gross margin %. Break-even units = fixed costs ÷ (price per unit − variable cost per unit).
What's the difference between break-even and cash break-even?
Cash break-even adds loan principal and tax set-asides and removes depreciation, because it measures what the bank balance needs rather than accounting profit.
Should owner pay be included in fixed costs?
Yes, at the level the owner needs or a market wage. Otherwise break-even understates what the business needs to earn.
What is a good margin of safety?
Above about 25% gives room to absorb a bad month. Below 10% is fragile.
How do I use break-even for a new hire?
Divide the hire's full yearly cost by your gross margin percentage. That's the extra sales needed, unless the hire also raises margin or capacity.
How often should I recalculate break-even?
Quarterly, and whenever prices, margins or fixed costs change significantly.
Related owner questions
Want a second pair of eyes on this?
If you'd like your break-even and cash break-even calculated from your own accounts, CFOSurge's Australian CFO team can work through it with you, using your actual numbers.