Answer six questions before you read on
1If you raised prices 10% tomorrow, how many customers could you lose before you'd be worse off?
At a 30% margin, a quarter of your volume. At 50%, one in six. Most owners guess a much smaller number, which is why they never raise prices.
2When did you last raise prices, and how much have your costs risen since?
If costs have risen and prices haven't, you've already cut your prices in real terms. Your customers got a discount you didn't decide to give.
3When customers have left you before, how often was price the real reason?
Usually it was service, reliability, a change in their needs or a relationship. Price is the easy reason to give, not always the true one.
4Which of your customers would be hardest to replace, and which would you not miss?
The customers who leave after a price rise are often the least profitable ones. Losing some of them can raise profit and free capacity.
5What do you give away that customers would pay for?
Rush jobs, extra revisions, after-hours calls, small orders, delivery. Charging for these is a price rise most customers accept as fair.
6Is a cut in price the safe option when sales are slow?
Rarely. At a 30% margin, a 10% price cut needs about 50% more volume just to stand still.
Why price is your strongest profit lever
A price rise goes straight to profit if volume holds, because costs don't change. A 5% rise on a 10% net margin lifts profit by half. No cost saving or sales push of the same size comes close.
That's also why price cuts are so dangerous: they come straight off profit, and the volume needed to make up for them is usually unrealistic.
The usual advice, and what it misses
- "Raise prices in line with inflation." Fine as a floor, but may leave you underpriced if you started too low.
- "Just tell them costs have gone up." True, but on its own it sounds apologetic and invites negotiation.
- "Raise everyone by the same percentage." Ignores where you're cheap and where you're not.
- "Wait until the economy improves." There's rarely a good time, and waiting compounds the gap.
The maths of a price rise
At a 35% margin, an 8% rise survives losing up to about 19% of volume. In practice, most rises lose a few percent at most.
Use gross margin (after all direct costs), not markup. If you're not sure of yours, see real margin per job.
Where to raise first
- New customers.
They've never seen your old price. Quote every new customer at the new rate from today.
- Work where you're cheapest relative to value.
Specialist, urgent, complex or high-risk work; customers who rely on you; jobs where you consistently win quotes easily. Winning almost every quote is a sign you're too cheap.
- Discounts.
Tighten who gets them and how often. Removing an automatic discount is a price rise most customers barely notice.
- Minimums and extras.
A minimum charge or call-out fee, rush fees, extra revisions, after-hours service, small-order fees, delivery.
- Tiers.
Offer a basic, standard and premium version. Many customers choose the middle; some pay for the top.
- Existing customers.
With notice, a short reason and a date, after the steps above.
How to tell customers
- Give notice: usually 30 days for most customers, longer for contracts or large accounts.
- Keep the reason short and plain. One sentence, not an apology.
- State the new price and the date.
- Call your most important customers before the letter or email arrives.
- Check your contracts for notice periods or price review clauses first.
Then hold the price. Most pushback is a test. Offer a choice instead of a discount: a smaller scope, a longer lead time, or a different tier.
Price rises in six businesses
The method is the same; the best place to raise differs in each business.
These are composite businesses with illustrative figures, built to show how the method works. They are not CFOSurge client results.
Sole trader electrician
Before and after (illustrative example)
| Hourly rate | A$95 → A$110 |
| Call-out fee | None → A$60 |
| Regular clients lost | 1 of 12 |
| Billable hours a week | 30 → 28 |
| Income from labour | up about 20% |
The diagnosis
The rate hadn't changed in three years while van, insurance and materials had all gone up. The client who left was the slowest payer and the most demanding.
The full solution, in order
- New quotes at the new rate immediately.
- Add a call-out fee to cover travel and admin.
- Tell regular clients with 30 days' notice.
- Use freed hours for better-paying renovation work.
- Review the rate every year.
- Track which clients push back; they're often also the slowest payers.
Don't do this
- Waiting for clients to agree.
- Making an exception for everyone who asks.
- Raising only the rate and leaving small jobs underpriced.
Numbers to watch every month
- Effective hourly rate
- Quote win rate
- Hours booked
Residential builder
A year of quoting (illustrative example)
| Work quoted | A$6.0M |
| Win rate | 40% → 34% |
| Work won | A$2.4M → A$2.04M |
| Gross margin | 15% → 18% |
| Gross profit | A$360k → A$367k |
| Result | Same profit, 15% less work and risk |
The diagnosis
Winning 40% of quotes signalled underpricing. At 18%, the builder earns the same gross profit on less work, which means less supervision, less risk and more capacity for better jobs.
The full solution, in order
- Raise quoted margin on renovation and complex work first.
- Add cost escalation clauses to longer contracts so material rises are passed on.
- Price variations properly rather than absorbing them.
- Track win rate by job type.
- Use the freed capacity to be selective about clients.
- Use cost-plus or schedule-of-rates contracts for work with many unknowns.
Don't do this
- Fixed-price contracts with no escalation terms on long jobs.
- Cutting margin to win against low bidders.
- Absorbing variations.
Numbers to watch every month
- Win rate by job type
- Quoted vs actual margin
- Work in hand
Online homewares store
Before and after (illustrative example)
| Price change on own-brand hero products | +9% |
| Site-wide sales | Monthly → quarterly |
| Free-shipping threshold | A$50 → A$90 |
| Orders | down 3% |
| Gross margin | 41% → 45% |
The diagnosis
Own-brand products can't be price-compared, so they carried the rise easily. The biggest gain came from fewer site-wide sales: customers had learned to wait for them.
The full solution, in order
- Raise prices on products customers can't compare first.
- Cut the frequency of site-wide sales.
- Lift the free-shipping threshold above the average order.
- Test price changes on a few products before rolling out.
- Watch conversion rate and order value weekly.
- Keep a price list history so you know when each product was last reviewed.
Don't do this
- Matching the cheapest marketplace seller on everything.
- Constant sales.
- Raising prices on easily compared branded goods first.
Numbers to watch every month
- Gross margin after fees and shipping
- Conversion rate
- Average order value
Bookkeeping and advisory firm
Annual fee review (illustrative example)
| Fee increase | 7% |
| Clients lost | 2 of 60, both among the smallest |
| Fee income | up 6% |
| Hours freed | about 60 a year |
The diagnosis
The firm had avoided reviews for two years. An annual, expected review with a clear letter caused almost no friction, and the clients who left were the least profitable.
The full solution, in order
- Schedule an annual fee review with the same month every year.
- Move to fixed monthly fees with defined scope.
- Price extra work separately.
- Call the largest clients first.
- Use freed hours for advisory work at higher rates.
- Offer a tiered service so price-sensitive clients have a lower option instead of leaving.
Don't do this
- Skipping reviews to keep clients happy.
- Open-ended scope.
- Different rules for clients who complain.
Numbers to watch every month
- Fees per client
- Realisation
- Client retention
Bistro
Before and after (illustrative example)
| Prices on the most popular dishes | +6% |
| Menu redesign | High-margin dishes moved to prime positions |
| Covers per week | Unchanged |
| Gross profit per cover | up 9% |
The diagnosis
Diners respond more to how a menu reads than to small price changes. Raising the most popular dishes slightly and promoting high-margin dishes worked better than raising everything.
The full solution, in order
- Cost every dish and set prices from gross profit per plate.
- Raise popular dishes modestly.
- Remove currency signs and price columns that invite comparison.
- Promote high-margin dishes through placement and staff recommendations.
- Review quarterly as produce prices change.
- Brief staff on the changes so they can explain them confidently.
Don't do this
- Across-the-board rises.
- Cutting portion sizes without telling anyone.
- Discount days that train customers to wait.
Numbers to watch every month
- Gross profit per cover
- Covers per week
- Food cost %
Industrial parts manufacturer
Before and after (illustrative example)
| List price increase | 5% |
| Notice to distributors | 60 days |
| New contracts | Cost pass-through clause |
| Distributors lost | None |
| Gross margin | 28% → 31% |
The diagnosis
The manufacturer had been absorbing raw material increases. Clear notice and a contract clause linking future prices to material costs removed the need for large, irregular rises.
The full solution, in order
- Give the notice period your contracts require, or more.
- Add a cost pass-through or review clause to new contracts.
- Tier pricing by volume so small orders pay their true cost.
- Meet your largest distributors before the notice.
- Review every six months against material costs.
- Set minimum order quantities or small-order fees for low-volume buyers.
Don't do this
- Absorbing input cost rises for years.
- Price rises without contractual notice.
- Small orders at large-order prices.
Numbers to watch every month
- Margin by customer
- Material cost index
- Order sizes
Hover over a business for a preview (tap on a phone), then click to open the full case.
A 30-day plan
- Week 1: work out your margin and the volume you can lose. List where you're cheapest relative to value.
- Week 1: new prices for all new quotes from today.
- Week 2: add minimums and charges for extras. Tighten discounts.
- Week 2: check contracts; draft the notice; call key customers.
- Week 3: send notice to existing customers with a date about 30 days out.
- Months 1–3: track volume, quote win rate and gross profit against the calculator's threshold.
- Every year: a scheduled price review, so rises are small and expected.
Stage 9 · AvoidSeven pricing mistakes
7 mistakes
- Apologising.
- Waiting years and then needing a large rise.
- Raising everything by the same percentage.
- Discounting immediately when a customer objects.
- Forgetting to update quotes, templates and websites.
- Ignoring contract notice periods.
- Cutting prices to win volume without doing the maths.
Stage 10 · DecidePrice decision guide
Summary table
| Signal | What it suggests |
|---|---|
| You win almost every quote | You're underpriced; raise for new quotes |
| Costs up, prices unchanged for a year or more | You've already cut your real prices; review now |
| Margin below your required margin | Price is the first fix |
| Customers mainly complain about lead times, not price | Demand exceeds capacity; raise prices |
| Volume falls more than the calculator's threshold | Review the segment; consider tiers rather than a reversal |
Official sources and guidance
Rules, rates and thresholds change. Check the current position at these official sources before acting.
- business.gov.au: Choose a pricing strategyCommon pricing approaches for small business.
- business.gov.au: Payment termsSetting and communicating payment terms.
ReferenceKey terms in plain English
7 terms
- Price elasticity
- How much demand changes when price changes.
- Gross margin
- Price less direct costs, divided by price.
- Break-even volume loss
- The fall in sales volume at which a price rise leaves gross profit unchanged.
- Minimum charge
- The smallest amount charged for any job or order.
- Tiered pricing
- Offering several versions at different prices.
- Cost pass-through clause
- A contract term allowing prices to change with specified input costs.
- Value-based pricing
- Setting prices from the value delivered to the customer rather than from cost.
Questions owners also ask
How do I raise prices without losing customers?
Raise for new customers first, then where you're cheapest relative to value, tighten discounts, add minimum charges and fees for extras, and give existing customers notice, a short reason and a date. Check the maths first: most businesses can lose far more volume than a price rise actually costs them.
How much can I raise prices?
Use the volume-loss formula: price rise ÷ (gross margin + price rise). At a 35% margin, an 8% rise survives losing about 19% of volume. Then look at where you're cheapest relative to value.
How do I tell customers about a price increase?
Give notice (usually about 30 days, longer for contracts), one plain sentence of reason, the new price and the date. Call your most important customers first.
Should I apologise for raising prices?
No. Be clear and confident. Apologising invites negotiation.
How often should I raise prices?
Review once a year on a fixed schedule, so rises are small and expected.
What if a customer pushes back?
Hold the price and offer a choice instead: a smaller scope, a different tier or a longer lead time.
Is it better to cut prices when sales are slow?
Usually not. At a 30% margin, a 10% price cut needs about 50% more volume just to stand still.
Do I need to give notice of a price rise?
Check your contracts and terms. Many business contracts set notice periods or review dates.
Related owner questions
Want a second pair of eyes on this?
If you'd like an independent view of where your prices sit and how to move them, CFOSurge's Australian CFO team can work through it with you, using your actual numbers.